How do I reset the password of my Flux IP Camera?

Resetting the password on a Flux IPC will require a PC/Laptop with IPTool3.0 installed.   You will need to connect the PC/Laptop to the same network as the IP camera and run the IPTool3.0.  Within the tool you will scan the network and find all Flux equipment on your network.  Find the mac address of the camera within the listed fields -> Type the mac address in under the "Restore IPC Configuration to Default" option -> Select OK -> If successful message prompts unplug the camera and plug it back in (You have 30 seconds to power cycle the camera or the restore will not work. -> This will default the camera completely and provide swap your IPC's user and password. (Username - admin with a password -123456). 

Step 5) Disconnect the camera and plug it back in.  Note if you do not do this in 30 seconds or less after the above steps the reset will not work.